It is a pressed flat wheel with a simple structure and convenient use, which is also important for workpiece polishing. Its collaborative use can maximize the polishing effect. However, polishing problems often occur during the polishing process due to issues with the selection of polishing materials and improper polishing operations. Below is an explanation of the precautions and correct usage of the polishing wheel.

The turning problem of the polishing wheel requires the operator to work. During the work process, it is necessary to use polishing wax to lean against the edge of the polishing wheel in order to attach the polishing wax to it. Then, gently lean the workpiece against the wheel surface and ensure that the workpiece is below the horizontal plane of the polishing wheel center axis, ensuring that the stress on the workpiece is facing itself to prevent the polishing wheel from throwing the workpiece out of the hand; The selection of polishing materials together is also important, as different polishing materials need to correspond to different workpieces.So the correct way to operate the polishing wheel is to first quietly touch the wheel surface with the workpiece and then remove the workpiece. This helps to remove sharp corners on the surface of the workpiece and prevent spots on the surface of the workpiece caused by excessive use of polishing wax and other polishing materials. If excessive use of polishing wax is caused by operational errors, it can be wiped off with iron or other materials, and repainted if necessary. It should also be noted that during the operation of the polishing wheel, do not forcefully press the wax on the surface of the wheel to prevent affecting the speed of the polishing wheel and thus affecting its function.Article source: Polishing wheel manufacturerhttp://www.jm-nanhua.com