Requirements for cleaning methods of resin wheels

2021-02-03 2439

Cleaning method

During the production process, diamond grinding wheels should be used to polish the belt. Generally, the grinding wheel needs to be removed and cleaned after 5-7 days of operation. (There are polished rubber debris on top, which tightly adhere to the surface of diamond sand after high temperature conflicts, making it difficult to clean.)

Now we soak it in acetone for 2 hours and then clean it with imported cleaning agent. The effect is very good, but it is not environmentally friendly and energy-saving.

Cleaning requirements:

1. To be environmentally friendly, free from ketones and not halogenated hydrocarbons.

2. Do not damage the diamond grinding wheel blade

Device knowledge

It is necessary to carefully inspect and distinguish the grinding wheel before installation. The steps to view and distinguish are:

1. Check if the trademark of the grinding wheel is correct and meets the performance, shape, and size of all selected grinding wheels.

2. Check and identify the appearance and structure of the grinding wheel. Observe the appearance of the grinding wheel with your eyes for any damage (or cracks). Grinding wheels with appearance damage (or cracks) cannot be used. Additionally, it is required that both ends of the grinding wheel be flat and free from obvious tilting. 3. Check and identify internal cracks in the grinding wheel. Holding the grinding wheel with your hand and gently tapping the grinding wheel with a wooden hammer to listen to its sound, the grinding wheel without cracks makes a loud sound, while the grinding wheel with cracks makes a hoarse sound, which cannot be used.

Article source: Resin wheel manufacturerhttp://www.jm-nanhua.com/